Hello Dear Forum Members,
My name is Simon and I'm new here.
Just started restoring my '67 S-Type and it appeared it had some minor accident in the front.
The body needs to be put on a frame and straightened as well as checked if all the reference dimensions are correct.
Does anybody have some dimensions chart to do that?
Or where could I find one?
Thank you,
Simon.
Dimensions chart needed
Re: Dimensions chart needed
Hi and welcome to the forum Simon. Some photos of your car and a brief history would be interesting please.
I do not have a dimensions diagram other than that in the blue book showing external dimensions but David or Glyn might.
The other option is to take some measurements from an original S Type. If you could add your location there might be someone living around the corner from you with an S type that could assist.
I do not have a dimensions diagram other than that in the blue book showing external dimensions but David or Glyn might.
The other option is to take some measurements from an original S Type. If you could add your location there might be someone living around the corner from you with an S type that could assist.
Rob.C. P1B8973BW
1968 S Type 3.4 Auto. Old English White.
1993 Yamaha FJ1200 Yellow
1966 Ford Anglia 1760 cross flow (still being built)
2012 Old English sheep dog. Grey and white.
http://torbayweddingcarclub.co.uk/?page_id=57
1968 S Type 3.4 Auto. Old English White.
1993 Yamaha FJ1200 Yellow
1966 Ford Anglia 1760 cross flow (still being built)
2012 Old English sheep dog. Grey and white.
http://torbayweddingcarclub.co.uk/?page_id=57
-
Glyn Ruck
- Posts: 1619
- Joined: Sun Oct 07, 2018 2:14 pm
- Location: Llandudno, Cape Town, South Africa
- Contact:
Re: Dimensions chart needed
Read the blue Service Manual from pages N28 to N36 including the diagrams ~ you should find all the measurements you want.. Below download & blow up.
That's it from Jaguar without the Churchill Jig.
Highest Res I have.
That's it from Jaguar without the Churchill Jig.
- Dimentions.JPG (144.61 KiB) Viewed 1073 times
- Brochure Hi Res..JPG (137.95 KiB) Viewed 1073 times
- Dimensions 1.JPG (66.95 KiB) Viewed 1073 times
- Body alignment Jig.JPG (124.28 KiB) Viewed 1065 times
1965 Jaguar 3.8 S Type, Sync4, OD, PAS, BRG/Biscuit on chrome wires.
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
http://www.jagstyperegister.com/forum_n ... ?f=3&t=152
A1B56966DN
-
David Reilly
- Posts: 184
- Joined: Fri Oct 27, 2017 8:02 pm
- Location: Wagener, SC USA
- Contact:
Re: Dimensions chart needed
Here is another one ...
Cheers
David
Cheers
David
-
David Reilly
- Posts: 184
- Joined: Fri Oct 27, 2017 8:02 pm
- Location: Wagener, SC USA
- Contact:
Re: Dimensions chart needed
- Jaguar 'S'-type Dimensions.JPG (77.62 KiB) Viewed 577 times
Last 100 Members Who Visited This Topic. Total 34 visits
Orlando St.R (2), 
RollyTG (2), Glyn Ruck (12), 
cass3958 (4), 
John Quilter (2), Treetrimmer (3), David Reilly (4), jerry_hoback (1), Albion (2), szyki (2)
Who is online
Users browsing this forum: No registered users and 1 guest