Search found 1553 matches
- Sun May 07, 2023 7:35 pm
- Forum: Ignition & Electrical
- Topic: scuttle vent
- Replies: 2
- Views: 1511
Re: scuttle vent
If you think you have a vacuum leak there are a couple of places it could leak from. Check all the hoses from the dash switch to the various vacuum switches. I had a leak right on the end of one of my rubber hoses where it joined the vacuum switch on the bulkhead. Next check the vacuum tank under th...
- Sat May 06, 2023 10:52 pm
- Forum: Your "S"-Type
- Topic: My new project - an unrestored 1965 3.8S automatic
- Replies: 10
- Views: 1791
Re: My new project - an unrestored 1965 3.8S automatic
Welcome to the forum and a nice looking project. The expensive bit is always rectifying rusty body parts and panels so if this is as rust free as you say then you could have a good one. If you come across a problem there are many on here who will try and help with advice and if you add you location ...
- Tue Apr 18, 2023 4:40 pm
- Forum: Suspension, Steering & Brakes
- Topic: Marles varamatic steering box
- Replies: 43
- Views: 5978
Re: Marles varamatic steering box
I think I am right in saying that the packing rings in the spring turrets were put on the drivers side so when the drivers weight was sat in the car the small packing ring evened out the suspension height. Mine had packing rings when I dismantled the car but I failed to note which ones went where so...
- Mon Apr 17, 2023 6:38 pm
- Forum: “S”-Type Parts Wanted
- Topic: Heater control lever knob (BD25857)
- Replies: 6
- Views: 2190
Re: Heater control lever knob (BD25857)
Nice one Andrew. 3D printing is the way to go with some of the obsolete parts on our old cars. Where abouts are you based as you do not have a location in your personal details.
- Tue Apr 11, 2023 9:50 pm
- Forum: General Discussion
- Topic: Tow truck options
- Replies: 6
- Views: 390
Re: Tow truck options
As John states the rear bumper is a pain to get off as the nuts are well hidden under the bumper and it is a case of a quarter turn of a spanner each time as access is limited. Add to that how long the bumper has been on the car and any corrosion you might have in the bolts. The bolts go into a meta...
- Tue Apr 11, 2023 11:02 am
- Forum: General Discussion
- Topic: Tow truck options
- Replies: 6
- Views: 390
Re: Tow truck options
If it is a tow truck ie a flat bed truck then nose to the rear is not a problem. The tow cable could be run via a soft material loop through the rear IRS cage but it depends on how steep the ramp up onto the tow truck is as the IRS cage is a fair light gage metal. You could run the cable right under...
- Wed Mar 22, 2023 7:25 pm
- Forum: Suspension, Steering & Brakes
- Topic: PAS reservoir o-rings
- Replies: 7
- Views: 757
Re: PAS reservoir o-rings
Likewise Jerry, What O ring? The underside of my reservoir has two push fit hoses which are not under pressure as one feeds the pump and the other is the return from the steering box. Both are as stated push fit with Jubilee clips (Number 12 ) to hold them in place as in the diagrahm below. Or are y...
- Sat Mar 11, 2023 9:50 am
- Forum: Your "S"-Type
- Topic: Overdrive electric circuits
- Replies: 11
- Views: 1247
Re: Overdrive electric circuits
John I have an Auto box so can't help with specifics but from my knowledge of working with my own wiring loom apart from the radio I cannot recall any inline fuses. All my fuses were/are situated behind the dash panel and all the wiring is centred around these eight fuses. Having said that looking a...
- Wed Mar 08, 2023 3:19 pm
- Forum: Engine & Drive Train
- Topic: dg250 front seal
- Replies: 7
- Views: 1069
Re: dg250 front seal
Nice to hear Jerry and helping with advice and photos is what the forum is all about.
- Sat Mar 04, 2023 9:44 am
- Forum: General Discussion
- Topic: David Reilly's Passing
- Replies: 19
- Views: 4109
Re: David Reilly's Passing
Although I am an avid lover and protector of the S Type marque I just don't have the time to take on something like this. I run my own wedding car business as well as training guide dog (seeing eye dog) puppies three days a week and I try and play golf twice a week so just no time to commit to takin...