THE INTERNATIONAL JAGUAR 'S'-TYPE REGISTER FORUM

Thanks for the info, will look into all the suggestions...

I used to have intermittent horn working, but now - nothing.
Have checked the horns and wiring - all ok
There seems to be a white wire going into the steering column, about even with the parcel shelf - not sure if this connects to something to do with the horns ?
Any ideas please ?

Apologies for tardy response, I’m having internet problems. Thanks for the suggestions. I’ll check the drive shaft orientation to start and may get it checked and balanced to ensure it is ok. Unfortunately I did not mark it up when I withdrew it for the engine out job. Am I correct in thinking that ...

Since motor and gearbox out, I now have a vibration in the car. It is not wheel related. Any ideas ?

Thanks John & cass3958,
Have added crankshaft oil ways clean out to my "to do" list and will definitely replace the core plugs !.
Cheers.

It's taken a while, but engine & gearbox now out of car. No real dramas, just a bit scary with it all up in the air !, used a similar engine lifter attachment as you cass. Because I'm not sure what parts were reused and what were new during the overhaul 10 years ago, I intend to replace most mov...

Thanks all, out the top it is with gearbox attached.
I've lifted motors out of a "parts" S and a 420 and it was pretty scary with all that weight up in the air !.
But it has to be done and I have the time and a couple of capable mates !.

Numerous factors point to an engine removal for me - low oil pressure, strange noises etc. Suspicion is there is a problem with main and/or crankshaft bearings. Questions: 1. I assume removal is out the top, via an engine hoist ? 2. Is it easier to remove both the engine & gearbox as one ? or ju...

I have removed the breather and cam covers to view/adjust the chain. Would you believe that both sides now have the same tension, no sloppy chain on the inlet side anymore ! I suspect that the comment re "sticking tensioners" may be the answer and these have loosened after running the engi...

Yes, definitely Jaguar #1 (firewall end).
I'll just have to see how it goes and if not right - start again - argh !