by cass3958 » Sat May 25, 2019 6:28 pm
Joe the "I" section at the bottom which you have marked in yellow goes in to the chrome and the "L" leg goes against the chrome on the inside of the window so the glass in its chrome sits against this as you close the window. It is pretty self explanatory when you offer it up. If you put it in the wrong way you cannot close the window!
The "L" on my first seal was way to thick and the window would not pull up to it and close properly.
Hope this photo of the rubber in my window helps.
- Attachments
-
- IMG_7015.JPG (1.51 MiB) Viewed 2598 times
Joe the "I" section at the bottom which you have marked in yellow goes in to the chrome and the "L" leg goes against the chrome on the inside of the window so the glass in its chrome sits against this as you close the window. It is pretty self explanatory when you offer it up. If you put it in the wrong way you cannot close the window!
The "L" on my first seal was way to thick and the window would not pull up to it and close properly.
Hope this photo of the rubber in my window helps.